Air Conditioners are responsible for almost 70 % of the energy consumption in most of the establishments. This is exactly where our Power Saver for Air Conditioner comes into the picture & helps saves energy by preventing thermal saturation & excess cooling. Thanks to its intelligent microcontroller and an inbuilt intelligent software program that senses, monitors and prevents energy wastage.
Save up to 30% of the running cost on split, window, ductal and tower air conditioners Air Conditioning accounts for 70 to 80% of any energy bill. Aircosaver is a unique, state of the art energy saving device imported from West Germany designed specifically to save energy on all window, split and package AC’s from 1 to 20-ton cap. It works on an advanced sensor has driven software algorithm based on the principle of Thermal Saturation. It is not a time-based unit that merely switches the machine on and off periodically thus compromising comfort and temperature levels. It should neither be compared nor confused with a timer based device. Aircosaver is a genuine energy saver that saves upto 30% in your air conditioning power bill without compromising comfort and temperature levels. We have an impressive list of satisfied customers and proven test results under varying conditions. This revolutionary device usually pays for itself in less than eight months. Every air conditioner should be fitted with one. There is no other product that delivers genuine energy savings like Aircosaver.
Why you need an Aircosaver? Air conditioners are designed and manufactured to cope with the extreme cooling demands of the few hottest days of the year plus a safety margin. However, in most cases this maximum output is not required. The system is thus oversized. Running the AC continuously until the thermostat switches it off, means that the system operates at excess capacity most of the time, wastes energy and adds to the electricity bill.
|Aircosaver is an intelligent control device which ads state of the art intelligence to air conditioning systems and improves their energy efficiency.|
|Achieves average energy savings of between 20% to 30% resulting in a short payback period.|
|Is a retrofit product to upgrade existing ACs|
Aircosaver’s sensor driven software algorithms are designed to detect thermodynamic saturation and to optimize compressor running. When thermal saturation is detected, Aircosaver switches into “Saving Mode” and turns the compressor off. Aircosaver prevents inefficient overcooling and saves power. After the compressor is switched off, the fan keeps running, cool air continues to be delivered and the system makes maximum use of the cooling energy stored in the coil. Once the stored energy is depleted, Aircosaver switches the compressor back on and it can work efficiently once again. The room temperature set on the thermostat is reached without the wasteful and inefficient part of the cooling cycle. Significant savings are achieved without compromising cooling comfort. Weather conditions, Aircosaver incorporates dynamic software to constantly adapt its settings to ensure efficient operation of your Air Conditioning system at all times. Aircosaver is designed and manufactured in West Germany to precision standards. It comes with the famous West German quality and reliability and is protected by a worldwide patent. Aircosaver has been tested in India by Godrej, Voltas, Reliance Energy Ltd., IIT Mumbai, Mahindra & Mahindra and many other reputed institutions. A few important test reports can be viewed below.
A typical cooling cycle with excess capacity works like this :
sendWhen the AC starts, the Compressor charges cooling energy into the evaporator coil where it is stored. At this stage, the system works at high efficiency because compressors operate most efficiently when fully loaded.
sendEven after the evaporator coil is fully charged and saturated, the compressor continues to run and delivers more gas to the coil than the coil can absorb. Thermodynamic saturation takes place. Running the compressor beyond this stage does not increase the cooling any more. A 1.5 Ton AC cannot become a 2 Ton AC because the compressor keeps running-a waste of energy!
Savings and Payback
- At current average rates of power, Aircosaver saves energy and pays for itself in less than 6 to 8 months if the AC is used for 6 to 8 hours a day.
- Aircosaver being an Electronic Energy Saving device qualifies for 80% depreciation in the first year under the Income Tax Act i.e. tax saving of 28% of the product value.
- Aircosaver is guaranteed against defective materials and workmanship for twelve months from the date of sale, physical damage excluded.
- Aircosaver is designed to be retrofitted to existing air conditioners. Installation is simple and can be carried out by any experienced air conditioner service technician within minutes.